Headboard makes the barrier between the head and wall when you sit. It is a calming part of the furniture and attaches to the bed frames. Sometimes it starts to hit the wall and will cause scratches both on the wall and wood.
How Do I Stop My Headboard From Hitting the Wall? You can stop the headboard from hitting the wall by tightening its bolts and nuts with pliers. The attachment of rubber doom door stops and protectors will prevent it from touching the wall. In addition, placement of furniture pads, thread locking adhesive and French cleats will fill the gap between them and do not allow wobbling and squeaking. It occurs due to extra loads on the bed, daily use, and temperatures changes.
There are two types of headboards: one is floating at the back, and the second is attached to the bed frame. They connect with bolts and nuts at their specific position.
Sometimes it bangs against the wall during the kinds of activities due to its attachment method, furniture construction, and trim molding thickness.
It is not only annoying but also distracts the person sitting or lying on the bed.
- 1 Easy Methods to Stop the Headboard from hitting the wall
- 2 Adjustment of metal plates on the headboard
- 3 Use rubber bumpers to keep the headboard straight
- 4 Use furniture pads
- 5 Why my headboard touches the wall?
- 6 How to stop the headboard from dropping?
- 7 How much does it cost to fix the headboard?
- 8 How much time does it take?
Easy Methods to Stop the Headboard from hitting the wall
First of all, attach the board with the bed and fix it according to the frame so that you will only handle one unit. Then, clamp it with furniture to stop them from moving and shaking.
Then take a drill machine and create holes with a drill bit according to the size of nuts. Place a washer of larger size on both sides; it will prevent the furniture polish and gives a powerful grip.
Sit on the bed and check if it is touching or not. If you find minor touching of the hardboard with the back, tighten the nuts and bolts firmly.
For this purpose, drag the bed away from the wall and look for the nuts and bolts holding the mattress and headboard together. You will need pliers and a wrench that can hold them and rotate without damaging them.
Do not directly start tightening the nuts; first, you should lose all the screws with the help plier and apply thread-locking adhesive around the threads. These are available at a hardware shop in the market, or you can order them online for $10.
It provides strong adhesive power to the nuts. Besides, you can drill additional holes in the bed to adjust firmly with the wall.
Adjustment of metal plates on the headboard
Modification plates are metal plates and have holes in them. If you face a problem inlining the bolts, place them in the bed frame and adjust the threads. It will provide a platform for additional nuts and make the headboard more stable.
Once you have connected it to the bed frame, it’s time to place some adhesive and non-damaging material between them. That will not allow it to hit the wall and scratch the paint.
Use rubber bumpers to keep the headboard straight
To fill the gap between them, rubber bumpers are available in the market in a good process. It costs starts from $15 and increases to $50 as the quality improves.
You buy them from any hardware shop in the package. A package contains a dozen of rubber bumpers and more. You should buy a bumper made of high quality so that it runs longer. Otherwise, they lose their adhesive power and fell between the gaps.
Peel them and place these at different places with minimum distance from each other to give extra firmness. After that, pull the bed towards the wall and take the backrest to check the wobbling of the board.
Use the remaining rubber bumpers in other cabinets and windows. They are adhesive and do not affect the finishing and surface.
Another name is rubber dome door stops or protectors; they are the same as rubber bumpers. They have different shapes and sizes, like plane surfaces from both sides and sticky knob top.
This product protects them and does not make an annoying sound while doing some activity.
If it is continuously hitting, the nuts and bolts will get much looser. it will suddenly break.
Use felt pads to stabilize the headboard and maintain its balance. Drill a hole, fix the threaded stem to the wall by hammer, and put felt pads at its top; now push the bed towards it and not attach directly.
These will reduce the shock and wobbling with strength. In addition, rubber bumpers, felt pads, and other protectors can stop these from hitting the walls.
There is another way to fix this disturbance to attach French cleats. Mark the corners with a pencil and then pull the bed away from it.
Keep in mind that two marks and measure the half distance to keep the cleat. Next, attach the cleat plates to the back of the headboards. These should be leveled with the cleats attached to the wall.
Carefully hang it to the French cleats and push the frames towards it.
Use furniture pads
Sometimes they wobble due to an imbalance of the bed’s legs and rubbing the floor on every action. Attach the furniture pads and rubber pads to reduce this hitting.
When the bed moves, then ultimately, the bed frame also moves and rubs against the wall. Take a rubber pad and elevate one corner of the bed. Instantly cover the edge of legs with furniture pads and repeat this phenomenon with the other three legs.
This will protect the scratches on the floor as well as a wall. It also reduces the slipping capacity of furniture on the floor. These are made up of rubber, and they will adhere to the marble to some extent.
Sometimes bed frame becomes squeaky; you should fix it as soon as possible. Otherwise, it will make the wood flexible, and a time comes when it breaks. It occurs due to the lighting or loosening of nuts and bolts.
Move the bed away and check which type of metalware holds these two things together.
The bed will be sturdier than before when you put the washers between the nuts and bolts. It will provide extra firmness and does not allow the bed to sound squeaky.
It will be more erect and does not shake while sitting and lying. Attach suitable hardware to the walls of your rooms.
There is another tip to reduce the noise created by the metallic accessories of furniture. Take a small quantity of water, apply it around the shells and spray the oil on the surface. It will squeeze in into the vacant spaces and does not make any annoying sounds.
When you have fixed the rubber bumper or door stopper on the corners and upper side of the bed, put these more at some distance from each other in the middle.
Polyester paddings and the attachment of foam is a quick and easy method to protect it from hitting the wall.
Why my headboard touches the wall?
It touches due to few reasons. The one is daily use of the bed; when you use it daily, it is your duty to check and repair the hardware timely; otherwise, it will bang and rub the wall.
You should know the weight bear capacity of furniture. A load of heavyweight on the bed will slide it slowly, and a time comes when nuts and bolts and create annoying sounds.
One of the reasons for headboard banging is the temperature change. The wood absorbs moisture from the surroundings and expands due to moisture.
Similarly, when there is a dry environment, it will shrink and make alterations in the furniture. The connection between the board and bed frames becomes weak, shaking the board while doing some activity.
How to stop the headboard from dropping?
You can stop it from dropping by hanging it on the wall. The easiest way to stop yourself entangle in this problem is to choose a bed that has a separate headboard.
If your bed lacks it, purchase it from the market according to the measurement of the frame. Pull your wooden furniture away from the wall and mark the points where you will drill holes.
Insert the thread into the holes and fix it with the help of a hammer and screwdrivers or pliers. Place the washer around them for grip. Hang the hardboard with these.
It will not drop the headboard, and the furniture will be safe from falling. Fix it to the wall by drilling holes on the frame and passing the nuts inside the wall.
It will make your furniture sturdy. Bring the bed to it and place it in front of it. Now you can have a backrest, read books and watch TV without any disturbance and fear of dropping it.
How much does it cost to fix the headboard?
You will fix your headboard in $100 to $200 effectively. If you are setting it with other adhesive materials such as rubber bumper, furniture pads, and French cleats, the cost will depend on them.
They all are available at the hardware shop at reasonable prices ranging from $10 to $50.
How much time does it take?
It will take 10 minutes to 30 minutes to stop the hardboard from hitting the wall. To reduce the time, gather all the material in one place before starting any procedure.
If you are drilling a hole, do it carefully and place the thread sturdy. The professional will take few seconds to do it. Attachment of rubber pads and door stopper will take a maximum of 15 minutes to 20 minutes.
Applying foam at the back of the headboard with adhesive material will only take 10 minutes to fix the problem. Choosing any procedure to fix it will not take more than 30 minutes.