Many people prefer to cover the bunk bed ladder when it is not in use. It is the essential part of the bunk bed and has equal importance as the furniture.
You can use wooden, metallic, and a combination of both to make the covers. You should cover it with a suitable protective shield so that it will add charm to the room.
How to Make a Bunk Bed Ladder Cover? You can make the bunk bed ladder cover with plastic, wooden, and fabric cover. In addition, you can also hang curtains at the level of guardrails and open these to cover them. You can also decorate the ladder cover with different colors and materials to add attraction. You can also make the shelves at every step for decoration.
You should be careful about the ladder when you buy a bunk bed. It depends on the choice and needs to use this furniture. You can cover it creatively using different materials so that it will fit the furniture.
Some people prefer it because there is less space in the room for children and teenagers. It will be helpful in this condition to manage rest area in less space. Some people like its arrangement and buy these to fulfill a wish.
DIY Methods to make bunk bed ladder cover
First, you will make the ladder than its cover. You can make this if you need to attach it to the furniture frame.
You can match the material; for example, if you have a wood bed, you can attach a wood rung with side rails. It depends on your choice to connect the metal ledge with wood or wood ledge with metal furniture.
The height from the upper surface to the floor is usually 60 inches to 72 inches tall from the surface. Take two large wooden pieces of the same length with 3 inches width and one and a half-inch thickness. Cut the small 10 inches wooden pieces to make the rungs between the side rails.
If the height is 72 inches, then cut the 8 inches small rungs. You will fix the pieces between the rails at a distance of 8 inches. In this way, there will be nine rungs in this ladder.
Measure the distance and mark the spot where you will attach these wooden rungs. Join these with nails and a hammer and make sure that all the nails are fully inside.
Cut the upper and lower end of the side rails at some angle to stand on the floor. Attach it with the bed frame, and the angle between furniture and ladder will be 25° or 35°.
Your ladder is ready to climb on the bed. You can make it with any material such as iron and steel with the same procedure. You can also make the straight one touching both upper and lower frames without setting it at some angle.
Now it’s time to make the cover; sometimes, it becomes necessary to hide it. If you are willing to make the wood shield, take a big wood block and measure the length from the bottom second or third step to the fifth and sixth step.
It will be about 24 inches and cut the block of the same length and 10 inches width. Add wooden sticks on the block according to the rungs. It will fix each other and provides support to the wooden shield.
You can buy these from the market as well. If it is straight and joins both beds, you can hang the curtain at the upper level. You can tie the curtains from the center at the sides when you need to go.
You can hide the straight and attached ladder with one side door. It will look like a cupboard, and you can open the door and go and then close it.
If it is at some angle and is far from the bed, you can add a shelf of different sizes touching the frame. It will look rungs from the front, but it will look like shelves when you look from the side. You can place toys, a clock, books, and some other accessories on it.
How wide is the bunk bed ladder?
Usually, the width of the bunk ladder is about 10 inches to 15 inches. However, many people prefer 15 inches wide because it has more area to stand and go to the upper portion.
Its width also depends on the length and width of the furniture. Therefore, when you place it on the head side, you should also consider its width. It should be the fourth part of the total width, which will look perfect.
If the width of the couch is 40 inches, then divide this number by four, and you will have 10 inches reading. It is better to take 10 inches wide stair for placing it in this size.
If you place it in the side of about 65 inches, divide this value by five, and you will get about 13 inches. Next, take the width thirteen inches and attach the wooden or metallic ladder to it.
You can add or subtract two to three digits from the resultant value according to your choice. For example, most people add extra two inches to make it fifteen inches in the thirteen inches.
It will look attractive and suitable if you manage the width according to the size and dimensions of your bunk bed. However, you should fix it in an appropriate place if you are going to attach it with a frame.
How to fix the ladder with the bunk bed?
You can attach it and also use it separately. Mostly these fix to the furniture frame to balance the weight while climbing to the upper portion.
Many beds have a ladder-shaped structure at the head and foot sides. The arrangement of wooden pieces or metallic rods is about ten inches apart, one after another from the floor.
It will not need any separate or attached steps to go on the upper side.
If you purchase a bed that does not have rung and rods in its structure, you should manage it for your convince.
First, if it already has guardrails around, then cut these from that side where you will attach them. Next, create a gap in the ladder width and fix it using nuts and clips.
Create holes in the frame with the help of a drill machine in the side rails, guardrails, and structure. You should be careful about the alignment of holes. Place it in such a way that the holes will face each other.
Place the nuts passing from the holes to reach the furniture frame. Tighten it with a screwdriver and make sure that it is not creating any sound.
You should place the guardrails first if it does not build in its frame. It will provide safety and support to the ladder. You can also fix the separate one when you need it and put it under the bed.
You should be choosy when you buy it. For example, it should not be slippery on the floor; if it does, place the rubber pads at the bottom of the stand.
Why would you cover the bunk bed ladder?
It is necessary to hide the ladder when you have toddlers in your home. The children rush toward it and try to catch the next steps. There is a risk of injury when they are not able to grasp it.
You can also protect it from scratches and manage the space; for example, you can hang the pocket bag to the rungs. Put comb, nail cutter, hairbrush, and torchlight in the pockets.
You cover the whole bed with a net curtain to avoid the mosquitoes, flies, and dirt. The straight and attached belay occupies less space and fits into the furniture. If you do not want to hide it, then put a pillow and hide it from inside.
What are the types of bunk bed ladder cover?
These are available in various materials, and you can also make these at home at an affordable price and spending less time.
Tread covers are the best thing to wrap the rungs. These are high quality and protect the ladder as well. In addition, it will be comfortable and will not slip when you put your feet on them.
You can make a plastic cover or buy it from the market. Always use high-quality plastic that is available in different colors and patterns. If this is present in the child’s room, choose the cover that has animation and cartoons.
The plywood cover is thinner than the wood, and you can alter it according to the area and space. You can make this using fabric at home and fix the zip at the side or in the middle to open and close the cover. The fabric covers are easy to maintain and wash.
The best option is the hanging of colorful and decent curtains. It will look traditional when you prefer decent colors.
You can use the leather sheet to cover it for a long and short time. Use high-quality leather in matching or contrast color with furniture to give an enchanting look. Using a stainless steel sheet to cover the ledge and hide the rungs in this modern and innovative age.
How to make a bunk bed ladder cover attractive?
You can do some creative work to make it attractive. For example, if you are wrapping with fabric and a curtain, stitch some beads and flowers on it.
You can adjust the mirror on plastic, steel, and wood cover to see your face. The best option to place the mirror is on the door of the ladder. When you close it, it will give a dressing look.
Decorate it with fairy lights and glitter stickers that will shine in the night. Then, you can hang the flower basket or flowers in the bottles at the rungs.
Paint the shield with suitable color and draw painting, artwork on it.
How to make a bunk bed ladder more comfortable?
You can make it more comfortable by the addition of little things. For example, put the cushions at the side of the wooden or metallic frame. You should add pillows to protect childer from falling.
Use foaming sheets around each step and wrap it with a cover. Your feet will feel relax when you put these on rungs.
You can also wrap around the wool noodles using adhesive material such as gum. It will make it cozy and do not harm your feet. Make sure that the material is not slippery; otherwise, you will have to adopt another way.
You can also use a piece of thick and soft fabric, for example, velvet and wool, to cover it. Then, take a large piece of cloth and cut it according to the width with extra two inches for folding.
The length of the fabric should be enough to double wrap the rung. Then, join the open end with a thread or adhere it with glue to not unwrap.
Another way to make it comfortable is that you can use cotton. Take a piece of clothing according to its measurement and stitch from the three sides. Fill the cotton in it to make a thick layer and also close the open end.
Repeat this procedure to make this for each rod. You have to make according to the number of steps. Wrap this around and join the two ends using thread and needle. If it is not available, you can wrap the colorful non-slippery tape around.
Is it safe for the children?
Sometimes it is safe, and sometimes it is dangerous for the children. It is safe in a manner that you do not need extra effort to climb on the upper bed. You should choose a ladder that has small steps so that your children can go without difficulty.
If it does not have a lower step, then you can attach it at home with little effort when no one is on the bed, then you should wrap it to keep the toddlers away.
It has been seen that toddlers try to step on it and fall. In this way, it is dangerous for toddlers. You can make it safe by wrapping it with a cover when there is no need for it for some time.
Related Articles:
Is it possible to move a bed without taking it apart?
Is it OK to convert antique full bed to queen?