How Long It Takes to Drywall a House?

How Long It Takes to Drywall a House?

Many people prefer to drywall a house over the paneling and wallpaper because it takes limited time but is long-lasting. Moreover, many factors affect time, such as the width and height of the room.

How Long It Takes to Drywall a House? It takes 5 to 30 days to drywall a new house, and it depends on the length and width of the walls. First, measure the room dimension and place the large sheets of gypsum starting from ceiling to wall and cut it for window and door opening. It is better to hang these sheets vertically with mud and compound substance.

There are two types of drywall such as paper and paperless. There is fiberglass wrapped around the gypsum in paperless instead of paper.

It gives protection to the home and enhances the home’s charm. You can make a similar texture of the wall and ceiling through it. Moreover, you can change the paint color whenever you want.

Time (in days) and cost of drywall according to the size of the house




500 square feet

3 days


1000 square feet

5 days


1500 square feet

9 days


2000 square feet

12 days


2500 square feet

15 days


3000 square feet

19 days


3500 square feet

22 days


4000 square feet

25 days


4500 square feet

28 days


5000 square feet

30 days


Can you finish the drywall process in one day?

It is not possible to drywall a house in one day because it is not viable to dry the coating layers in one day. Therefore, you can only apply two coats daily if the first coat dries.

The small size house, about 500 square feet, requires a minimum time of about 3 days to complete the procedure. The time will increase as the room size increases.

The professional needs to be careful to hang these sheets when the ceiling is high.

It requires careful handling and more time to set it on the high ceiling. You will also need more than one day to coat the high roof because it takes time to dry.

Why do you drywall a house?

Drywall is a modern and trending procedure in America. Here are some of its benefits:

Mold and moisture resistant

The gypsum plaster is mold and moisture resistant. There are many areas where the wall gets moist during the winter and rainy seasons. It is the best thing to hang, especially in the house present in humid regions.

It has a protective layer that does not allow the moisture to go into the lining of sheets and cause them to swell. As a result, the molds can grow on wooden sheets quickly as the spores are present in the air.

Moreover, the molds will not grow on the gypsum sheets even if these come in contact. Therefore, it can bear the humidity present in the environment and maintain its texture.

Eco friendly

These are eco-friendly, so most people prefer them to hang in rooms. It maintains the internal environment according to the weather.

Its constructive material is eco-friendly and requires low energy. It will increase the temperature of the room when it is cold outside.

In this way, the internal temperature lowers when hot weather is outside. As a result, the harsh weather will not damage the structure and texture of drywall sheets.

Give protection

The placement of drywall sheets provides protection and safety to your new house. The professionals attach it with nails and compound mud.

It will not leave the wall and give strength to it. Many people like it to place it in the whole house because it can bear the touches when you drag the furniture inside and outside of the rooms.

Affordable price

Everyone can access the drywall easily as it comes in an affordable price range with maximum durability. On the other hand, the paneling and plaster wall is expensive and does not have a long life.

In addition, it is affordable and repairable at a low cost with labor charges.

Easy to repair

It is easily repairable such as you can fill the holes and gaps created due to weather and the use of the low-quality sticky compound.

Furthermore, the furniture edges will scratch the finish, and the dust particle will start sticking here.

You can level the surface using mud by tapping. Also, you can change the paint color when you are changing the interior. Finally, you can make artwork, drawings, and paintings using multiple colors.

It looks charming when you make the natural scene using bright and cool colors. However, many people like simple walls, so they use only one color to give the plan and smooth texture.

Fire resistant

The fire-resistant quality of drywall makes it safe and sound for people. It can bear the high temperature and resist the fire spreading from one room to another.

You should call a professional to repair and replace the worn-out piece if you need it. Many people like to hang it in the offices for protection and safety from the wire spark.

It can maintain energy and temperature. The fire does not damage the lining and texture of the sheets.

Classical look

It is the best thing to choose if you want the classic appearance from inside the house. It makes the wall smooth and plans when you use high-quality paint.

You can change the color and texture according to the interior and furniture. For example, people drywall their houses, and many apply it to offices and small apartments.

How to hide a butt joint when you drywall a house?

First, you should know about the butt joint in drywall. When the sides of sheets join together vertically, you will see the lining and 2 to 3-centimeter gap between them.

The professional calls it the butt joint and fills it with mud. You should use the scrapper and a thin metal strip to seal the lining properly.

The butt joints are the critical points when you drywall a new house. Therefore, you should hide it so that no one can identify it.

Measurement, cutting, and framing

You should measure the area where you want to hang these sheets. The measurement will be square feet because these sheets are available in large sizes in square to rectangular shapes.

Cut the extra length and width of the gypsum sheet while placing it in its suitable position. It is better to place the large blocks on the ceiling and cut the small pieces.

Adjusting the back frame is the start of the procedure to apply drywall after measurement. 

Start from the ceiling

Start hanging the sheets from the ceiling to the side walls. It will give neat finishing at the corners and edges. 

Set the two ladders at a distance and put the wooden or metallic sheet on them. Ask your friend to hold the sheet on one side. Next, hit the nails with the hammer; the nails should be close to each other.

The sidewall sheets also provide support to the ceiling. Fill the corner joint gap appropriately with mud and compound substance. You can also start from the sidewall depending upon your choice.

Hang the frame on the wall

You will not do it yourself because it is hard work and needs experience. Instead, call a professional with a helper to install these in the room.

First, place the frame on the ceiling and then on the wall. Then, use mud or compound product at the backside to increase sustainability.

Only one person cannot do this job alone as it is a little heavier than plastic and thin wood panels. Therefore, it is better to use the spirit level to balance it.

Use a rotary cutout tool to cut it

There are doors and windows in the room. You should keep in mind the size and location of the sheets. Use a rotary cutout tool and cut the small circles on the ceiling for fans and bulbs.

You can also use the aviation snips for cutting and trimming. First, take a pencil and mark the doors and windows openings on the sheet. Then, cut it with a cutter or aviation snip and trim the edges properly.

Taping and mud filling

Start taping the sheets with a rubber hammer all over the surface. It will fix the sheets in a suitable position. However, the gypsum panel is rigid and does not sag in the center due to flexibility.

You will see the visible and small gaps between the two sheets at some distance. Mix the water with mud and make a fine mixture.

There are two types of drywall mud available in the market. The one is in powder form, and you have to make it with water.

The other is already in the paste form, but you have to make a thin paste. Fill the joints appropriately and leave them for some time to dry.

Furthermore, remove the mixer from the sides with a scraper and apply coats on the whole wall. Many people prefer white and off-white colors, or you can use other colors for final finishing.

Which things to consider for appropriate drying after drywall?

The weather affects the drywall procedure. If the weather is cold, wait for the summer to paint and panel.

The time of placing drywall and drying depends on the size of the room. For example, the high ceiling room will take more time than the lower ceiling.

The room without windows requires more time to dry than the large window opening in the room. Therefore, you should choose a simple, engraved, and colorful pattern.

Many people decide the number of coating before starting the procedure, but some decide on the time of paneling. It is better to double coat the wall for neat texture.

How to decrease the time of drywall mud drying?

You can reduce the time of drying by adopting the following methods.

Apply the thin coats of mud for finishing the sheets. If you want to apply more than two coats, the mixer should be diluted and give proper time for drying.

You can increase the room’s temperature with heaters and turn on the inverter as the drywall is fire-resistant, so it will not damage the surface of sheets.

It is better to open the doors and windows and allow the fresh and natural light to come inside. The flow of air and sunlight will decrease the time of drying.

Moreover, the use of the dehumidifier reduces the humidity inside the room. Therefore, it will decrease the moisture content in the air, and the coating will be dry soon.

You can use the blow dryer to get your room ready for furnishing. The blow dryer will release the air under pressure.

Related Articles:

Blackout Curtains For Your Bedroom

Should Bedroom Curtains Have to Touch the Floor?

Which Color Curtains Make a Room Look Big?

Tips to Decorate Around a Large Wall Clock

Why Are My White Curtains Turning Yellow?