Many people add LED lights to their rooms because it looks appealing and adds color to the surroundings. In addition, it is an easy way to add contrasting colors to your home.
How to Make LED Lights Stick to Textured Walls? You can make LED lights stick to textured wall that provides a rough and bumpy surface for the strips with adhesive backing. You can use mounting hooks or a staple gun to stick them indirectly without glue. In addition, you can use the aluminum mounting channels and attach them to the wall with the help of clips. Furthermore, the double-sided tape is a cost-effective method to fix these strips by attaching the tape to their backside and pressing them gently against the wall for a few seconds. The foaming tape also provides a better sticky platform for these LEDs to stick.
Textured walls look attractive in the rooms and give an elegant finishing to a smooth surface. In addition, it hides dirt and provides a clean look.
Different options are there, like orange peel that looks like a skin of an orange and hides flaws on the surface efficiently.
Moreover, the knockdown texture hides minor imperfections, but it is challenging to clean as dirt accumulates within ridges.
How do you make LED lights stick to a textured wall?
There are many ways to stick the LEDs on your wall, including adhesive and non-adhesive. You can choose one of these methods to hang on the wall.
Mounting hooks
The adhesive hooks contain a sticky base with a removable plastic cover. A small hook is present on the other side where you can hang the light string.
Some non-adhesive hooks are also available that can attach to the wall with the help of nails. Moreover, each pin needs one screw to fix correctly on the surface.
Moreover, you can purchase a pack of 15 hooks for $2 to $3, which is enough to hang a 15-foot-long string.
Staple gun
The staple gun can help attach these to the wall. You have to keep the strip of lights in one hand and put it close to the surface.
Then, use a gun and staple it at that position. Be careful while pinning because it can damage the wires inside the insulation.
It is better to use a crown-shaped staple that cannot pierce inside the insulation; instead, keep the strip in its place.
Mounting channels
You can use mounting channels of aluminum material to stick a long strip. Then, you can fix them on the corners of the room to give a professional look.
This technique relies on the adhesive LED bands that adhere to these channels. These channels provide a smooth surface where the sticky side of strips can attach firmly.
Surface preparation
Preparing the surface and mounting channels is better before mounting. You can use a damp cloth and rub it inside the channels to remove dirt and grease.
The oily surface can interfere with the attachment of these strips and make them slip off the surface.
Use alcohol as a cleaning agent to prepare the wall as it does not leave moisture droplets and dry the surface.
Fix LED strips on the track
After cleaning the mounting channels, attach these lights to the deep tracks. Next, remove the plastic cover slowly and fix it within aluminum tracks.
Do not hurry to remove the backside cover at once because it affects the adhering property of the strips. In addition, the dirt particles can affect their stickiness and durability.
Attach mounting channels to wall
You have to use small clips with a sticky surface on one side to attach these mounting rails to the wall.
Fix them in a position where you want to hang these light strips. Then, you have to pass these mounting channels through those clips.
Connect with a power source
After fixing the aluminum channels on the wall, you have to connect the ends of the wires with a power source. It provides an energy source to lighten up.
Furthermore, switch on the power button and check whether they lighten up or not.
How to stick LED strip light on wall without damaging paint?
These can damage the paint if you use adhesive agents directly on the wall. The extent of damage depends on the paint quality and strength of adhesives.
It is better to apply them indirectly by using hooks and strips like command strips. In addition, mounting putties are also good in protecting the paint from damage.
However, these command strips are only suitable for smooth surfaces, and you cannot apply them on textured surfaces and fabrics.
Mounting putty helps attach poster or picture frames without any damage. You can use it in place of nails and tapes and other adhesive agents to fix these lights.
Clean the surface before fixing a long string of colorful lights to keep it sticky for long. Then, use your hands to mold it according to the size.
Attach it to the backside of the band and paste it on the surface. Press it against the wall to adhere firmly.
How to prevent LED lights from falling off the textured wall?
Depending on the installation method, the light bands can fall off when they lose their stickiness with time.
It is better to avoid purchasing products with sticky backing because they cannot maintain a firm grip on the wall.
You can use foaming tape, which provides better adhering property. In addition, it can stick efficiently on unclean and textured surfaces.
You can fix this tape on the surface directly and attach the strip with a 3M backing. It keeps the lights in place and maintains their durability.
Do LED lights stick to popcorn wall?
The popcorn wall provides a rough and uneven surface for these strips to adhere. In addition, the rough surface creates barriers to the smooth attachment of LED adhesive bands on the wall.
Moreover, tiny grooves make the surface uneven and decrease the attachment efficiency of these products.
These do not stick to the bumpy surface with the help of hot glue or any other adhesive agents. Instead, you have to use a staple gun or mounting tracks for fixing.
These lights are flexible and have a low-profile design that makes them feasible for attachment. An oily surface can make them slide off the wall, while a dirty surface makes them less sticky.
Therefore, you can add these lights to any type of surface, including smooth and uneven, but that needs to be clean and non-slippery.
How to stick LED light strip on wall without adhesive?
You can stick the LEDs without using any adhesives that can otherwise damage the wall’s surface. A double-sided tape is a cost-effective choice as you have to pay almost $5 to $7.
You can cut them according to the width of the band and paste them below it. Then, attach the strip quickly before it dries out and loses its adhering property.
Furthermore, some sticky clips are also available to help attach these LED lights. The backside of these clips is sticky and covered with a plastic cover.
You have to remove the cover and paste it on the wall. Then, pass it within the clip that can clamp it well for a long time.
Related Articles: