Many people complain that they can not keep their sofa back cushions in place. Here are 9 easy methods to keep cushions on the sofa.
How to Keep Sofa Back Cushions in Place? You can keep the back sofa cushions in place by using the glue, hooks and pins, rug pad, sewing with the cover, velcro tape, grippers, and shelf liner. Place the cushions into their place and push them again so that they fit accurately on the sofa.
Nothing is more irritating than sitting on a couch, and it slides in various directions. It makes the user uncomfortable, and the sofa becomes useless in most cases.
Use Rug Pad to fix back sofa cushions
Sofa back cushion sides do not stay in their position until there is complete security for them. This method is convenient for protecting the sliding of them from the surface.
The rugs help in keeping the cushion in a specific place. There is a proper method for adjusting this rug beneath the body of the couch. The process contains a few steps that are as follow,
Buy a rug according to your requirement, and the pieces of this material are available online and at the rug store. Choose a piece of fabric according to the size of the sofa and the area o back cushions.
Making a rug pad for your couch at home is a tricky process. It requires expertise in terms of measurement and hiding the small to medium size pad of the rug.
These pads have the least sliding nature on smooth surfaces, and they are helpful for such problems.
Firstly move the sofa in the forward direction and remove all the cushions from it one by one.
Using a rug pad needs a lot of cleaning. Vacuum the whole surface for better adherence to the rug pad. Measure the size and dimensions of the area the cushions comprise.
Carry out the trimming process to adjust the length and width of the rug pieces. The sides must be appropriate, and it must not contain any sharp edges.
Put the piece on the surface of the sofa and press it with gentle hands. The fluffy rug causes the cushions to pop out, and the settlement of the seats also adjusts the back cushions in place. The better settling of the pieces enhances the grip of the cushions.
Use glue to keep sofa back cushions in place
People use immediate solutions for settling the cushion into their place. The easy processes include the use of glue. It is not an efficient process, but it is for instant occasions.
It serves in better adherence of the cushions back to the place. The strength depends on the amount of glue, and it is a critical process.
Use any foam sticking glue for the sofa and make sure the color is not very prominent, or it destroys the appearance of the couch.
These are available online and on the sofa stores for adherence to the sofa covers and cushions.
Clean all the area with a fiber-free fabric, do not add water and dry the wet space with a soft cloth. This will fix the sticky leather sofa.
Take the glue out of the tube or jar and put it in a bowl. Do not directly apply it n the wood surface.
Use a brush and apply it to the furniture and its surface. Leave it for a few seconds, and then place one cushion on the sticky area.
Push it on the backside and apply a little amount of force. Settle every cushion on the glue and press it by using an iron.
Make the appearance smooth and appealing, and then adjust the seating cushion with the backside.
Allow the glue to dry for proper gripping. It is an effective process, and you can carry it out two to three times every three months.
It cost you one hundred to three hundred dollars. The process requires less than two hours, and the cushion gets its adherence place instantly.
Use Velcro tape for sofa cushions
Velcro tape is available for this problem. These are available in various shapes and for adjusting the sofa back cushion in their place.
There are many uses, and it is very advantageous for gripping. They are easily removable and cost-effective.
The installation of this tape needs professional skills. The whole procedure is not extremely difficult, but it should be strong enough to hold the cushions’ surface.
They must control the pressure of weight when people sit on them. It is for those people who want to protect themselves from the sewing process.
The initial step is about the removal of all the cushions from the couch.
Each of them requires the strips individually, and you cannot paste a single strip and adhere to all the cushions in one line.
Measure the size of the equipment before cutting and wasting the Velcro tape into strips. They are also available in a ready-made form, but cutting it all by you is most effective.
Scissor the tape into at least fifteen to twenty centimeters separately. They have separate covering and are removable.
Scratch the backside patching and adhere on a piece on the source of the backside cushion, and Put it on the bottom area so that it completely disappears on the final stage.
Apply the adhesive solution on the strips of Velcro tape for proper adjustment. Push the cushion in a backward direction it is for an accurate position.
The alignment should be accurate, and all cushions must settle in one line otherwise, it can cause sagging in a leather sofa.
One end must meet the other end in one straight direction. Stick them to the bottom of the couch and push them all over again.
Leave them to dry and also allow some time for the gripping of the adhering solution. It requires more time than the tape, but the efficiency is excellent.
Use underlay padding on the sofa
An underlay cushion pad helps a lot in keeping them in their specific position. They reduce the sliding to a limit.
These are very famous in terms of such problems and available ready-made in the market and online stores. These are also known as non-slippery cushion pads.
The standard size for them is almost sixty centimeters in length, and the same is for the width. They are easy on the scissor, and it makes the whole process favorable.
Buy them from an authentic sofa stuff store and never compromise on the quality. There is no restriction of color because it undergoes the cushions and loses its visibility.
Remove all the cushions of your couch and clean it by using a vacuum pump. Measure the size of your cushion.
Keep the size of padding smaller than the cushion size because they should not appear on the surface.
Lay it onto the surface and backside area of the couch. Always place it in the middle area. Place the cushion back into its original place.
The pad does not work on the wet cushions. Always blow-dry the fabric, and then put them on the fabric pad. It is a cost-effective process, and mostly it is a once-in-a-lifetime investment.
Install the shelf liners
These are a great solution in such a procedure, although many people are unaware of their advantages. They are available almost at every shop of such stuff like kitchen stuff store and sofa covers.
They are in rubber material and are flexible. Nature makes them more comfortable being behind the cushions.
They are easy to adjust to all types of surfaces, and wood attracts them the most.
All of them are present in various sizes, and you can settle them with little effort. The proper method of installation is as follow,
Make your couch cushion-free and clean it by using a cleaning machine. The dirt does not allow the sticking of liners, and hence cleaning plays a vital role.
Calculate the size of the cushions one by one. Mostly all of them are equal, but it varies with the design of the furniture.
Calculate the width and depth of them. Use a measuring tape or any other measuring instrument at home.
Cut the piece according to the measurement by using sharp scissors. Adjust all the individual parts in a row and sew them by using a sewing machine.
If you do not want to follow the sewing process, keep the liner’s size a bit bigger than the cushion.
Adjust the extra portion in the loops and lines of the couches. Put it down on the base of the seat and tuck the excessive portion in the sides of the furniture. Cut the edges and put them properly, and they should not be visible.
Test the sofa by putting weight on it, and in case no cushion pop out, just put the cushions back into the position. It allows for great gripping.
Use Pins and hooks for sofa back cushions
It is one of the most tricky processes in terms of execution. It is a permanent solution to the problem and is very convenient for the users.
It involves the hooking that does not allow the sliding of cushions anymore.
You require some new and fresh hooks of proper size. Gather some fabric for installation.
The whole process includes stitching and sewing, so you need such skills as a priority. You can take the help of a friend for this long-lasting solution.
The hooks must contain metal and plastic material, and the fabric should be strong enough to firmly bear the whole procedure. Cut the fabric by using sharp scissors, and the cut must be in two halves.
Start sewing by using the needle, sew one portion of the fabric to the furniture’s surface, and adjust the other one to the cushion.
Make sure they are aligning with each other it allows good power of grip. Settle the metal ring with one piece; carry out this process by needle and thread. Attach the second piece of fabric with a plastic hook.
Follow the sewing process for all the sliding cushions. Place the cushions back to their original position and cross the hooks between the rings.
Patching
It is a solution for those issues when the cushions slide by the weight or force. Patching resolves this issue by filling the space.
You require a fabric of the same color as your cushions; buy it in any size, so you cut it in the required size.
Remove the cushions and measure each of them, then measure the space between the cushions.
Align them in a row and check the distance between them. Cut the fabric according to the measurement of the central area.
Sew them in log strips and then fill them with polyester. Stitch each strip between the hollow spaces.
Push the outer edges inside the sides of the cushion and settle them properly in a row. Sit on the seat and check the backside pressure in terms of weight.
It is a process that is very helpful for those people who have sewing skills.
Use Grippers
These are different from the hooks, and they require extra support to fit in properly. It is a convenient process for all the users, as it requires less to no expertise.
You can perform the process by keeping the cushions on the couch or by removing them. Use some tape of any size and type but keep the process in your mind.
The grippers for these cushions are available at the market in various designs and sizes. They are in the packet forms, and each packet contains at least eight to sixteen grippers.
Adjust one end of the hook inside the cushion and the other end in the second in the same row. Clip off the gripper and settle the cushions with each other.
Push them into their place and take the weight test. Use the cushions without the fear of their sliding by these strong grippers.
Sew sofa cushions with cover
It is an excellent method for those who ha sewing and designing skills. It reduces the chances of cushion sliding permanently. The process is simple and as follow,
Take a needle and sewing thread in the same color as the cushions.
Align them in a straight position without any gap. Sew the fabric of the cushion with the cover of the couch.
Make some design if the thread is visible, or try to hide it. Place each cushion firmly with the backside and leave it for force checking.
Perform a weight test, and in case of any hollow area, put more stitches in the same place.
Related Articles:
How to repair a sofa bed frame?
